Radiolink R12DSM R6DSM R6DS R9DS R12DS Receiver 2.4G Signal for AT9 AT9S AT10 AT10II RC Remote Control Multiple choice

96% of buyers enjoyed this product!
516
Color:
Quantity:
View cart→

Radiolink R12DSM R6DSM R6DS R9DS R12DS Receiver 2.4G Signal

for AT9 AT9S AT10 AT10II RC Remote Control

Multiple choice

​.

———————————————————————————————————————————————————————————————————
———————————————————————————————————————————————————————————————————
R12DSM:
Please note of fixed wing and helicopter user:
R12DSM should be used with the Flight Controller supporting S.BUS or PPM, R12DSM can not support PWM (Pulse Width Modulation, 1 cable 1channel connection)
Receiver model: R12DSM
Size: 30*15mm
Weight:2.5g
Channel: 10,12 channel compatible
Signal: S-BUS&PPM
Working Voltage: 4.8-6V
Working electricity: 40-180mA(Input Voltage 5V)
Antenna Length: About 9cm
Disctan(About): Ground 1100M, Midair 4000M,The actual operating distance is related to the flight environment.
Suitable RC Remote control model: AT9, AT9S,AT10, AT10II
Communication: DSSSS and FHSS Dual-spread anti-interference technology
Package includes:
1 x Raiolink R12DSM Receiver
———————————————————————————————————————————————————————————————————
———————————————————————————————————————————————————————————————————
.
.
.
R6DSM
Please note of fixed wing and helicopter user:
R6DSM should be used with the Flight Controller supporting S.BUS or PPM, R12DSM can not support PWM (Pulse Width Modulation, 1 cable 1channel connection)
Two signal working mode:
Blue/purple LED, SBUS signal , 10 channels totally.
Red LED always, PPM signal, 10 channels totally.
Technical Parameters
1) Channels: 10 channels
2) Working voltage: 4.8-6V
3) Working current: 38-45mA (input voltage: 5V)
4) Size: 15*13 MM
5) Weight: 1g
6) Detachable antenna
7) 4096 section precision, 0.25us per section, servo anti-shake rudder.
8) Control distance: about 600 meters, actually control distance depends on the environment.
Package includes:
1 x Raiolink R6DSM Receiver
———————————————————————————————————————————————————————————————————
———————————————————————————————————————————————————————————————————
.
.
.
.
R6DS:
Profuct Features:
Radiolink R6DS, 2.4G 6 channels receiver, DSSS and FHSS spread spectrum working synchronously, use for Radiolink transmitters AT9, AT9S and AT10 AT10II. SBUS, PPM and PWM signal possible working at the same time.
Technical Parameters:
1. Channels: Red LED indicator is for PWM mode. Blue LED for SBUS/PPM, can be extended to 10 channels.
2. Power input: MAX 6V
3. Control distance: 600 meters air, or even farther beyond your sight
4. Current consumption: 38-45mA (5V)
5. Size: L×W=25×15mm
6. Weight: 3.4 grams
7. Precision: 4096
Package Included:
1x Radiolink R6DS receiver
———————————————————————————————————————————————————————————————————
———————————————————————————————————————————————————————————————————
.
.
.
.
.
R9DS:
Specifications:
Brand: RadioLink
Model: R9DS
Channel: 9channel, CH9 is for S.BUS
Working voltage: 4.5V-10V
Current: 38-45 mA (Voltage input: 5V)
Section precision 4096
Item size: 43 * 24 * 15mm
Item weight: 10.7g
Package List:
1 * Radiolink R9DS Receiver
.
.
.
.
.
.
———————————————————————————————————————————————————————————————————
———————————————————————————————————————————————————————————————————
.
.
.
.
.
R12DS:
Product Features:
​Radiolink R12DS, 2.4G 12 channels receiver, DSSS and FHSS spread spectrum working synchronously, compatible with Radiolink transmitters AT9, AT9S, AT10 and AT10II.
S-BUS and PWM signal working at the same time.
Two signal working mode:
(1)PWM signal output working mode: red LED indicates PWM signal output, 11 channels Totally.
(2) S-BUS signal output working mode: blue/purple LED indicates S-BUS signal output, 12 channels totally.
S-BUS and PWM signal working at the same time. S-BUS signal channel(3 pin of row 11) output 12 channels S-BUS signal, PWM signal channels(3 pin of row 1 to row 10) output CH3 to CH12 PWM signals, but 12 channel in total. How many PWM signal channels you can use depends on how many S-BUS signal channels you have used(e.g: you have use 4 S-BUS signal channels, then you have 8 PWM signal channels to use).
Technical Parameters:
1) Channels: 12 channels: output 12 channels signal, support S-BUS and PWM signal output synchronously.
2) Working voltage: 4.8-10V
3) Working current: 38-45mA (input voltage: 5V)
4) Size: 50*31.5*14.5 MM
5) Weight: 14g
6) Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT10/AT10II display when work with flight controller APM or PIX.
7) 4096 section precision, 0.25us per section, servo anti-shake rudder.
8) Control distance: about 4 kilometers air (Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations).
Package Included:
1* R12DS Receiver
.
.
.
.
.
How to match code with transmitter:
1. Put the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter and make sure the transmitter Red&Green Indicator light bright at the same time, then power on the Receiver.
3. Connect CH3 of Receiver to ESC 5V.
4. There is a black button on the Receiver, use a thin stick keep press the button two seconds, receiver light starts blinking, after about blinking 8 times, match code success and receiver signal LED always on!
Installment of receiver antenna:
1.The antenna must be kept as straight as possible. Otherwise it will reduce the effective range.
2.Large model aircraft may has some metal part interfering signal; in this case the antennas should be placed at both sides of the model. Then the best RF signal condition is obtained at any flying attitude.
3.The antennas must be kept away from conductive materials, such as metal and carbon. at least a half inch. The coaxial part of the antennas does not need to follow these guidelines, but do not bend it in a small radius.
4.Keep the antennas away from the motor, ESC, and other noise sources as far as possible.
5.The receiver can be packed by sponge or foam for shockproof when it is installed to the model. After all of the above steps were finished, turn off the transmitter and then power it on, now the program functions to assure it under control of transmitter with a right connection.

SHIPPING AND DELIVERY

We are proud to offer international shipping services that currently operate in over 200 countries and islands world wide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.

How do you ship packages?

Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.

Do you ship worldwide?

Yes. We provide free shipping to over 200 countries around the world. However, there are some locations we are unable to ship to. If you happen to be located in one of those countries we will contact you.

What about customs?

We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.

How long does shipping take?

Shipping time varies by location. These are our estimates:
Location *Estimated Shipping Time
United States 10-20 Business days
Canada, Europe 10-20 Business days
Australia, New Zealand 10-30 Business days
Central & South America 15-30 Business days
Asia 10-20 Business days
Africa 15-45 Business days
*This doesn’t include our 2-5 day processing time.

Do you provide tracking information?

Yes, you will receive an email once your order ships that contains your tracking information. If you haven’t received tracking info within 5 days, please contact us.

My tracking says “no information available at the moment”.

For some shipping companies, it takes 2-5 business days for the tracking information to update on the system. If your order was placed more than 5 business days ago and there is still no information on your tracking number, please contact us.

Will my items be sent in one package?

For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you've specified combined shipping.

If you have any other questions, please contact us and we will do our best to help you out.

REFUNDS & RETURNS POLICY

Order cancellation

All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.

Refunds

Your satisfaction is our #1 priority. Therefore, you can request a refund or reshipment for ordered products if:

  • If you did not receive the product within the guaranteed time( 45 days not including 2-5 day processing) you can request a refund or a reshipment.
  • If you received the wrong item you can request a refund or a reshipment.
  • If you do not want the product you’ve received you may request a refund but you must return the item at your expense and the item must be unused.

We do not issue the refund if:

  • Your order did not arrive due to factors within your control (i.e. providing the wrong shipping address)
  • Your order did not arrive due to exceptional circumstances outside the control of . (i.e. not cleared by customs, delayed by a natural disaster).
  • Other exceptional circumstances outside the control of https://besttoys4u.com

*You can submit refund requests within 15 days after the guaranteed period for delivery (45 days) has expired. You can do it by sending a message on Contact Us page

If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 14 days.

Exchanges

If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.

Please do not send your purchase back to us unless we authorise you to do so.

Shopping cart

×